--- title: "Coastal Stucco Materials Guide | San Diego County | ELN Stucco" description: "Guide to stucco materials rated for coastal San Diego environments. Compare lath types, cement mixes, sealers, and fasteners for salt air and marine moisture resistance." lang: en json-ld: | [ { "@context": "https://schema.org", "@type": "HomeAndConstructionBusiness", "@id": "https://elnstucco.com/#organization", "name": "ELN Remodeling", "alternateName": "ELN Remodeling – Lath & Plaster Specialists", "description": "ELN Remodeling specializes in lath & plaster installation, stucco installation, and stucco repair throughout Oceanside, CA and San Diego County.", "url": "https://elnstucco.com", "telephone": "+1-760-521-5951", "priceRange": "$$", "image": "https://elnstucco.com/favicon.png", "areaServed": [ { "@type": "City", "name": "Oceanside", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Vista", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Carlsbad", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "San Marcos", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Encinitas", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Escondido", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Fallbrook", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "AdministrativeArea", "name": "San Diego County", "containedInPlace": { "@type": "State", "name": "California" } } ], "hasCredential": { "@type": "EducationalOccupationalCredential", "credentialCategory": "Contractor License", "name": "California State License Board", "recognizedBy": { "@type": "Organization", "name": "California Contractors State License Board" }, "identifier": "1136993" }, "knowsAbout": [ "Lath & Plaster Installation", "Stucco Installation", "Stucco Repair" ], "serviceType": [ "Lath & Plaster Installation", "Stucco Installation", "Stucco Repair" ], "sameAs": [] }, { "@context": "https://schema.org", "@type": "Service", "name": "Coastal Building Materials for Stucco", "description": "Guide to stucco materials rated for coastal San Diego environments. Compare lath types, cement mixes, sealers, and fasteners for salt air and marine moisture resistance.", "provider": { "@type": "LocalBusiness", "name": "ELN Stucco", "telephone": "+1-760-521-5951", "url": "https://elnstucco.com", "areaServed": { "@type": "AdministrativeArea", "name": "San Diego County, California" } } }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What is the best stucco material for coastal homes?", "acceptedAnswer": { "@type": "Answer", "text": "A three-coat Portland cement stucco system with 304 stainless steel lath, Type V cement with air-entraining admixture, synthetic WRB, and stainless steel fasteners provides the most durable system for properties within 1 mile of the coast. This specification typically lasts 40-60+ years with proper maintenance." } }, { "@type": "Question", "name": "Is stainless steel lath worth the extra cost?", "acceptedAnswer": { "@type": "Answer", "text": "For properties within 1 mile of the coast, 304 stainless lath costs $1.00-$2.00 more per square foot than galvanized but eliminates the most common failure point (lath corrosion). Over a 40-year period, stainless lath saves 30-50% compared to replacing galvanized lath-based stucco every 15-20 years." } }, { "@type": "Question", "name": "What sealer works best for coastal stucco?", "acceptedAnswer": { "@type": "Answer", "text": "Penetrating silane/siloxane blend sealers provide the best balance of deep penetration, salt resistance, and breathability. They reduce water absorption by 90-95% while allowing interior moisture to escape. Apply after 28-day cure and reapply every 5-8 years for coastal properties." } }, { "@type": "Question", "name": "Can I use EIFS (synthetic stucco) on coastal homes?", "acceptedAnswer": { "@type": "Answer", "text": "EIFS systems are not recommended for coastal environments in San Diego. The synthetic finish coat is relatively impervious, but moisture that enters through cracks or penetrations becomes trapped behind the system. This trapped moisture accelerates hidden damage. Traditional three-coat stucco with proper sealers is preferred for coastal applications." } }, { "@type": "Question", "name": "What type of caulk lasts longest near the ocean?", "acceptedAnswer": { "@type": "Answer", "text": "Polyurethane sealants rated for marine exposure provide 10-15 years of service near the coast. Silicone sealants offer 15-20+ years but are not paintable. Avoid acrylic latex caulk, which degrades within 2-3 years in salt air. Look for products with 500+ hour salt spray test ratings." } }, { "@type": "Question", "name": "Does fiber-reinforced stucco resist salt damage better?", "acceptedAnswer": { "@type": "Answer", "text": "Adding polypropylene or alkali-resistant glass fibers to the stucco mix improves crack resistance by 30-50%, reducing the pathways for salt penetration. Fibers do not replace proper mix design or sealer application but provide an additional layer of defense. Typical fiber addition rate: 1-1.5 lbs per cubic yard of mix." } }, { "@type": "Question", "name": "How much more does coastal-grade stucco cost?", "acceptedAnswer": { "@type": "Answer", "text": "Coastal-grade materials add 20-40% to initial material costs compared to standard inland specifications. For a typical 2,000 sq ft home, this translates to $4,000-$8,000 additional material cost. However, the extended service life (40-60 years vs. 15-20 years) makes coastal-grade specification more economical over the building's lifetime." } }, { "@type": "Question", "name": "Should I use acrylic or cement-based finish coat near the coast?", "acceptedAnswer": { "@type": "Answer", "text": "Cement-based finish coats are preferred for coastal applications. They are more permeable (allowing moisture to escape), more resistant to salt crystallization, and more repairable than acrylic finishes. Acrylic finishes can trap moisture if they develop cracks, leading to accelerated hidden damage." } }, { "@type": "Question", "name": "What is the minimum galvanizing specification for coastal lath?", "acceptedAnswer": { "@type": "Answer", "text": "G-60 (0.60 oz zinc/sq ft) is the absolute minimum for any stucco application. For coastal properties 1-5 miles from the ocean, G-90 (0.90 oz/sq ft) is recommended. Within 1 mile, upgrade to stainless steel. The zinc coating is a sacrificial barrier — once depleted, corrosion of the base steel begins immediately." } }, { "@type": "Question", "name": "Can I add waterproofing to existing coastal stucco?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. Penetrating silane/siloxane sealers can be applied to existing stucco to reduce moisture penetration. The stucco must be clean, dry, and free of coatings that would block penetration. Professional application ensures proper coverage and absorption. This is the most cost-effective maintenance step for coastal stucco protection." } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://elnstucco.com" }, { "@type": "ListItem", "position": 2, "name": "Coastal Building Materials for Stucco", "item": "https://elnstucco.com/coastal-stucco-materials" } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://elnstucco.com/" }, { "@type": "ListItem", "position": 2, "name": "Coastal Building Materials for Stucco" } ] } ] --- [![ELN Remodeling - Lath & Plastering](/assets/eln-logo-signage-BHAAi5k4.png)](/) [Home](/)Services[Commercial](/commercial)[Gallery](/gallery)[Reviews](/reviews) ENES [760-521-5951](tel:760-521-5951)[Free Estimate](/request-estimate) ENES 1. [Home ](/) 2. Coastal Building Materials for Stucco Coastal Stucco Guide # Stucco Materials for Coastal Environments Selecting the correct materials for coastal stucco installation and repair is the single most important factor in system longevity. Standard inland specifications lead to premature failure within 5-10 years in marine environments. This guide covers material options, specifications, and cost comparisons for San Diego County's coastal zones. [Call 760-521-5951](tel:760-521-5951)[Get a Free Estimate](/request-estimate) Licensed & Insured CSLB #1136993 24 Years Experience Section 1 ## Metal Lath: The Foundation of the Stucco System Metal lath is the reinforcing backbone of three-coat stucco. In coastal environments, lath corrosion is the most common cause of system failure. Upgrading lath material is the highest-impact investment for coastal stucco longevity. ### Standard Galvanized Steel Lath (G-60) The minimum specification for any stucco application. G-60 coating provides approximately 0.85 oz of zinc per square foot. Adequate for properties 1+ miles from the coast. Expected life in marine zone: 10-20 years before significant corrosion begins. Cost: $0.30-$0.50 per square foot. ### Heavy Galvanized Steel Lath (G-90) Thicker zinc coating (0.90 oz per square foot) provides 30-50% longer life than G-60 in coastal exposure. Good choice for properties 0.5-1 mile from the ocean. Expected life in marine zone: 15-25 years. Cost: $0.40-$0.65 per square foot. ### 304 Stainless Steel Lath Chromium-nickel alloy with inherent corrosion resistance. No sacrificial coating to deplete. Expected life in severe marine exposure: 50+ years. Recommended for properties within 0.5 miles of the ocean. Cost: $1.50-$2.50 per square foot. ### 316 Stainless Steel Lath Contains molybdenum for superior chloride resistance. The premium option for beachfront properties with direct salt spray exposure. Expected life: 75+ years even in severe marine conditions. Cost: $2.50-$4.00 per square foot. ### Fiberglass Mesh Lath Alkali-resistant fiberglass mesh is immune to corrosion. Used primarily in EIFS systems but increasingly specified for three-coat stucco in coastal applications. No galvanic corrosion risk. Cost: $0.60-$1.00 per square foot. Section 2 ## Portland Cement and Stucco Mix Design The cement matrix determines stucco's density, permeability, and resistance to salt crystallization. Coastal mix designs differ from standard formulations in several important ways. ### Type I/II Portland Cement (Standard) General-purpose cement adequate for most inland applications. Moderate sulfate resistance. The baseline for standard three-coat stucco. Not recommended as the sole binder for severe coastal exposure without admixtures. ### Type V Portland Cement (Sulfate-Resistant) Lower C3A (tricalcium aluminate) content resists chemical attack from sulfates and chlorides. Preferred for coastal base coats (scratch and brown). 10-15% cost premium over Type I/II. ### Air-Entrained Mix Design Adding air-entraining admixture creates microscopic bubbles (4-6% air content) that relieve internal pressure from salt crystallization and freeze-thaw cycles. Reduces salt damage progression by 40-60%. Essential for any stucco within 1 mile of the coast. ### Low Water-Cement Ratio (0.40-0.45) Lower water content produces denser stucco with reduced porosity. Less permeable stucco allows less salt penetration. Requires experienced application — lower workability demands skilled plasterers. Coastal projects should not exceed 0.45 water-cement ratio. ### Crystalline Waterproofing Admixtures Products like Xypex or Krystol are added directly to the stucco mix. They react with moisture and cement byproducts to fill pores and micro-cracks. Reduce permeability by up to 90%. Self-healing properties repair minor cracks automatically when exposed to moisture. ## Need Coastal Stucco Help? Free inspections and estimates for all San Diego County coastal properties. [Call 760-521-5951](tel:760-521-5951) Section 3 ## Weather-Resistant Barriers (WRB) The WRB is the last line of defense between moisture and the structural wall. Coastal environments demand higher-performance barriers than inland applications. ### Grade D 60-Minute Building Paper Two layers required by code for three-coat stucco. Asphalt-saturated kraft paper. The most common WRB for stucco applications. Adequate for most conditions when properly lapped. Life expectancy in coastal conditions: 20-30 years. ### Synthetic WRB (e.g., Tyvek StuccoWrap) Polyethylene-based barriers offer superior tear resistance, UV stability, and salt resistance compared to asphalt felt. Drainage channels reduce moisture contact with sheathing. Higher cost ($0.15-$0.30/sq ft vs. $0.08-$0.15 for felt) offset by longer service life. ### Fluid-Applied WRB Liquid membranes applied directly to sheathing provide seamless coverage without lap joints. Products like Prosoco R-Guard or Henry BlueSkin VP100 eliminate the weak points where water entry most commonly occurs. Premium option for high-value coastal properties. Section 4 ## Fasteners: The Overlooked Weak Link Fastener failure is one of the most common causes of stucco delamination in coastal environments. Corroded fasteners cannot hold lath against the substrate, leading to sections of stucco pulling away from the wall. ### Galvanized Roofing Nails (Standard) Hot-dip galvanized nails are the minimum specification. Ring-shank profile resists pullout. G-185 galvanized coating provides approximately 1.85 oz zinc per square foot. Life expectancy near coast: 15-25 years. Cost: $0.02-$0.04 per fastener. ### Stainless Steel Nails (304) Recommended for properties within 1 mile of the ocean. No coating to deplete. Expected life: matches structure life. Must be 304 grade minimum — 302 stainless is not chloride-resistant. Cost: $0.08-$0.15 per fastener. ### Stainless Steel Screws (305/316) Screws provide superior pullout resistance compared to nails. 305 stainless for moderate coastal exposure. 316 stainless for beachfront. Higher labor cost for installation but significantly better long-term performance. Cost: $0.12-$0.25 per fastener. ### Galvanic Compatibility Never combine dissimilar metals. Stainless steel lath requires stainless fasteners. Galvanized lath requires galvanized fasteners. Mixing metals creates galvanic corrosion cells that accelerate failure of the less noble metal. ## Need Coastal Stucco Help? Free inspections and estimates for all San Diego County coastal properties. [Call 760-521-5951](tel:760-521-5951) Section 5 ## Sealers and Protective Coatings Surface protection reduces moisture and salt penetration into cured stucco. The right sealer significantly extends maintenance intervals and system life. ### Penetrating Silane Sealers Small molecular size penetrates deep into stucco pores (up to 3/8 inch). Chemically bonds to silica in the cement matrix. Reduces water absorption by 85-95%. Does not change surface appearance. Life: 5-8 years in coastal exposure. Products: Prosoco Sure Klean Weather Seal, BASF MasterProtect H 177. ### Penetrating Siloxane Sealers Larger molecular size than silane — better for denser stucco surfaces. Slightly higher surface concentration provides additional salt resistance. Reduces water absorption by 80-90%. May slightly darken surface when first applied. Life: 7-10 years. Products: Sikagard 701 W, Chemours Evercrete Vetrofluid. ### Silane/Siloxane Blend Sealers Combines the deep penetration of silane with the surface protection of siloxane. The most popular choice for coastal stucco. Reduces water absorption by 90-95%. Life: 5-8 years. Products: Prosoco Blok-Guard & Graffiti Control, BASF MasterProtect H 400. ### Elastomeric Coatings Thick, flexible coatings bridge hairline cracks (up to 1/16 inch). Provide a physical barrier against water and salt. Must be breathable formulation to avoid trapping moisture. Good for cosmetic refresh combined with protection. Life: 7-12 years. Higher cost but combines protection with appearance enhancement. Section 6 ## Cost Comparison: Standard vs. Coastal-Grade Materials Investing in coastal-grade materials adds 20-40% to initial installation cost but extends system life by 100-200%. The following comparison is per square foot of wall area for a complete three-coat stucco system. ### Standard Inland Specification G-60 galvanized lath, Type I cement, standard mix, 2-layer felt WRB, galvanized nails, no sealer. Total material cost: $2.50-$3.50/sq ft. Expected life near coast: 10-15 years. 20-year cost including one replacement: $5.00-$7.00/sq ft. ### Moderate Coastal Specification (1-5 miles from ocean) G-90 galvanized lath, Type I/II cement with air entrainment, 2-layer felt WRB, galvanized ring-shank nails, silane/siloxane sealer. Total material cost: $3.50-$5.00/sq ft. Expected life: 25-35 years. 20-year cost including maintenance: $4.50-$6.00/sq ft. ### Premium Coastal Specification (under 1 mile from ocean) 304 stainless lath, Type V cement with crystalline waterproofing, synthetic WRB, stainless fasteners, penetrating sealer. Total material cost: $5.50-$8.00/sq ft. Expected life: 40-60+ years. 20-year cost including maintenance: $6.00-$8.50/sq ft. ### Beachfront Specification (under 500 feet from ocean) 316 stainless lath, Type V cement with air entrainment + crystalline waterproofing, fluid-applied WRB, 316 stainless screws, premium sealer. Total material cost: $7.00-$11.00/sq ft. Expected life: 50-75+ years. 20-year cost including maintenance: $7.50-$11.50/sq ft. FAQ ## Coastal Building Materials for Stucco Questions ### What is the best stucco material for coastal homes? ### Is stainless steel lath worth the extra cost? ### What sealer works best for coastal stucco? ### Can I use EIFS (synthetic stucco) on coastal homes? ### What type of caulk lasts longest near the ocean? ### Does fiber-reinforced stucco resist salt damage better? ### How much more does coastal-grade stucco cost? ### Should I use acrylic or cement-based finish coat near the coast? ### What is the minimum galvanizing specification for coastal lath? ### Can I add waterproofing to existing coastal stucco? ## Related Guides [Coastal Moisture Damage](/coastal-stucco-moisture-damage) [Salt Air Stucco Damage](/salt-air-stucco-damage) [Stucco Protection Methods](/stucco-protection-methods) [Stucco Installation Services](/services/stucco-installation) ## Protect Your Coastal Stucco Call for a free inspection and customized protection plan for your San Diego County property. [Call 760-521-5951](tel:760-521-5951)[Request Written Estimate](/request-estimate) Customer Reviews ## What Our Customers Say Reviews from Google for ELN Remodeling 5.0 (2033 reviews) M Maria G. 2 weeks ago ELN did an amazing job on our home's stucco. The crew was professional, on time, and the finished product looks incredible. Highly recommend! R Robert T. 3 weeks ago Best stucco contractors in San Diego County! They repaired extensive damage from water and now our house looks brand new. Fair pricing too. J Jennifer L. a month ago Professional from start to finish. The team explained the entire process and completed our re-stucco project ahead of schedule. Very impressed! C Carlos M. a month ago Excellent craftsmanship! They matched our existing stucco texture perfectly for the repair work. You can't even tell where the repairs were made. S Susan K. 2 months ago Great experience with ELN Stucco. They were responsive, gave a detailed quote, and the work quality exceeded my expectations. Will use again! D David H. 2 months ago Our lath and plaster installation turned out beautiful. The team was skilled and cleaned up thoroughly after the job. Highly recommend! P Patricia R. 3 months ago ELN repaired cracks in our stucco that other companies said couldn't be fixed. Amazing work and very reasonable prices. Thank you! M Michael B. 3 months ago Top-notch stucco installation on our new addition. The color matching was perfect and the finish is flawless. True professionals! L Lisa A. 4 months ago Called for a stucco repair estimate and they came out the next day. Work was completed within a week. Excellent communication throughout. J James W. 4 months ago Been using ELN for all our commercial properties. Consistent quality, reliable scheduling, and competitive pricing. Best in the business! ### Find Us on Google Maps [ELN Remodeling ](/) Lath & Plaster Specialists with 24 years of trade experience. Licensed & insured California contractor serving Oceanside and San Diego County. [760-521-5951](tel:760-521-5951) Oceanside, CA & San Diego County #### Quick Links - [Service Area](/service-area) - [Blog](/blog) - [About](/about) - [FAQ](/faq) - [Contact](/contact) #### Our Services - [Lath & Plaster Installation](/services/lath-and-plaster) - [Stucco Installation](/services/stucco-installation) - [Stucco Repair](/services/stucco-repair) #### Stucco Repair - [Oceanside](/stucco-repair-oceanside-ca) - [Carlsbad](/stucco-repair-carlsbad-ca) - [San Diego](/stucco-repair-san-diego-county) - [Escondido](/stucco-repair-escondido-ca) - [Encinitas](/stucco-repair-encinitas-ca) - [Vista](/stucco-repair-vista-ca) - [San Marcos](/stucco-repair-san-marcos-ca) - [Temecula](/stucco-repair-temecula-ca) - [Poway](/stucco-repair-poway-ca) - [Del Mar](/stucco-repair-del-mar-ca) - [Solana Beach](/stucco-repair-solana-beach-ca) - [La Jolla](/stucco-repair-la-jolla-ca) - [Murrieta](/stucco-repair-murrieta-ca) - [Chula Vista](/stucco-repair-chula-vista-ca) - [Rancho Santa Fe](/stucco-repair-rancho-santa-fe-ca) #### Stucco Installation - [Oceanside](/stucco-installation-oceanside-ca) - [Carlsbad](/stucco-installation-carlsbad-ca) - [San Diego](/stucco-installation-san-diego-county) - [Escondido](/stucco-installation-escondido-ca) - [Encinitas](/stucco-installation-encinitas-ca) - [Vista](/stucco-installation-vista-ca) - [San Marcos](/stucco-installation-san-marcos-ca) - [Temecula](/stucco-installation-temecula-ca) - [Poway](/stucco-installation-poway-ca) - [Del Mar](/stucco-installation-del-mar-ca) - [Solana Beach](/stucco-installation-solana-beach-ca) - [La Jolla](/stucco-installation-la-jolla-ca) - [Murrieta](/stucco-installation-murrieta-ca) - [Chula Vista](/stucco-installation-chula-vista-ca) - [Rancho Santa Fe](/stucco-installation-rancho-santa-fe-ca) #### Stucco Replacement - [Oceanside](/stucco-replacement-oceanside-ca) - [Carlsbad](/stucco-replacement-carlsbad-ca) - [San Diego](/stucco-replacement-san-diego-county) - [Escondido](/stucco-replacement-escondido-ca) - [Encinitas](/stucco-replacement-encinitas-ca) - [Vista](/stucco-replacement-vista-ca) - [San Marcos](/stucco-replacement-san-marcos-ca) - [Temecula](/stucco-replacement-temecula-ca) - [Poway](/stucco-replacement-poway-ca) - [Del Mar](/stucco-replacement-del-mar-ca) - [Solana Beach](/stucco-replacement-solana-beach-ca) - [La Jolla](/stucco-replacement-la-jolla-ca) - [Murrieta](/stucco-replacement-murrieta-ca) - [Chula Vista](/stucco-replacement-chula-vista-ca) - [Rancho Santa Fe](/stucco-replacement-rancho-santa-fe-ca) #### Lath & Plaster - [Oceanside](/lath-plaster-oceanside-ca) - [Carlsbad](/lath-plaster-carlsbad-ca) - [San Diego](/lath-plaster-san-diego-county) - [Escondido](/lath-plaster-escondido-ca) - [Encinitas](/lath-plaster-encinitas-ca) - [Vista](/lath-plaster-vista-ca) - [San Marcos](/lath-plaster-san-marcos-ca) - [Temecula](/lath-plaster-temecula-ca) - [Poway](/lath-plaster-poway-ca) - [Del Mar](/lath-plaster-del-mar-ca) - [Solana Beach](/lath-plaster-solana-beach-ca) - [La Jolla](/lath-plaster-la-jolla-ca) - [Murrieta](/lath-plaster-murrieta-ca) - [Chula Vista](/lath-plaster-chula-vista-ca) - [Rancho Santa Fe](/lath-plaster-rancho-santa-fe-ca) #### Resources - [Stucco Repair Costs](/blog/stucco-repair-cost-san-diego) - [Signs You Need Repair](/blog/signs-stucco-needs-repair) - [Repair vs Replacement](/blog/stucco-crack-repair-vs-replacement) - [Coastal Moisture Damage](/coastal-stucco-moisture-damage) - [Salt Air Stucco Damage](/salt-air-stucco-damage) - [Coastal Building Materials](/coastal-stucco-materials) - [Stucco Protection Methods](/stucco-protection-methods) #### Neighborhoods - [Rancho Del Oro](/neighborhoods/rancho-del-oro-oceanside) - [Fire Mountain](/neighborhoods/fire-mountain-oceanside) - [South Oceanside](/neighborhoods/south-oceanside) - [La Costa](/neighborhoods/la-costa-carlsbad) - [Arrowood](/neighborhoods/arrowood-oceanside) - [Ivey Ranch](/neighborhoods/ivey-ranch-oceanside) - [Ocean Hills](/neighborhoods/ocean-hills-oceanside) - [Shadowridge](/neighborhoods/shadowridge-vista) - [Bressi Ranch](/neighborhoods/bressi-ranch-carlsbad) - [Guajome](/neighborhoods/guajome-vista) #### Get a Free Estimate Ready to start your project? Contact us today for a free, no-obligation estimate. [Call Now](tel:760-521-5951) ![Google](https://www.google.com/favicon.ico)Google Reviews 5.0 (2,033 reviews) CA CSLB License #1136993 | Service Area: Oceanside, CA & San Diego County | [Verify License](https://www.cslb.ca.gov/OnlineServices/CheckLicenseII/CheckLicense.aspx?LicNum=1136993) **ELN Remodeling** • Phone: 760-521-5951 © 2026 ELN Remodeling. All rights reserved. Lath & Plaster Specialists • 24 Years of Trade Experience [Call Now](tel:760-521-5951)[Book Now ](/request-estimate) 60 seconds Get an itemized stucco estimate by email — free, no sales visit, reply in 1 business day. [or call 760-521-5951](tel:760-521-5951)[Start My Estimate](/request-estimate#start)